| Repaired Frames | |
| These are pictures of a Kawasaki 250 frame I built in the 70's for Kevin Cameron. It was crashed at Daytona and the steering head is out of round and some tubes are slightly bent. I fixed it for a friend who bought it. It hasn't been used in about 50 years. | |
 |
 |
|
You can see the bend in the down tubes
|
|
 |
 |
|
Old head tube removed and ready to be cleaned up.
|
Mounted in the jig with the new headstock back
in.
|
| This is one of our MT125 frames that needed help. Actually they all do as the vibration cracks them. |
|
 After cutting out the cracked tubes
|
 Fitting the first 2 tubes |
 Brazing them in |
 Seat tubes fitted and brazed |
 Rear motor mount fixed. I also raised the rear section of the frame to make it a little easier on the body. |
|